Video Configuration Submenu; Dmi Event Logging Submenu - NEC DIRECTION L Service Manual

Video Configuration Submenu

This submenu can be used to configure specific video features. To enter the submenu,
highlight the field, then press Enter. The following option appears:
T
Palette Snooping
This option controls the ability of a primary PCI graphics controller to share a
common palette with an ISA add-in video board. Select "Enabled" or "Disabled"
(default).
To return to the Advanced Menu, press Esc.

DMI Event Logging Submenu

This submenu can be used to view and modify DMI Event Logs. To enter the submenu,
highlight the DMI Event Logging field, then press Enter. The following options appear:
T
Event Log Capacity/Event Log Validity
These fields indicate whether space is available in the Event Log, and whether the
contents of the log are valid.
T
View DMI Event Log
If there are no event logs stored, you cannot access this log.
T
Clear All DMI Event Logs
This option clears the DMI Event Log after rebooting the system. Choose "No"
(default) or "Yes."
T
Event Logging
This option enables logging of DMI Events. Choose "Disabled" or "Enabled"
(default).
T
Mark DMI Events as Read
This option is used to mark off all DMI Events as read. If necessary, press Enter
to access the Confirmation dialog box and confirm your preference.
To return to the Advanced Menu, press Esc. Then press the right arrow (cursor) key to
move to the Security Menu.
Setup Utility 2-13