1/4-Inch Device Removal - NEC DIRECTION L Service Manual

3. Locate the two clips at the front of the system that secure the diskette drive.
Figure 5-4 Locating the Two Diskette Drive Clips
4. Squeeze the two clips and pull the diskette drive out of the front of the system.

5 1/4-Inch Device Removal

Remove an optional 5 1/4-inch device from the system unit as follows.
Remove the system access cover, front panel, and the device cage as previously
1.
described.
Label and unplug the signal and power cables from the optional device in the
2.
5 1/4-inch device cage. Unplug the audio cable from an optional CD ROM drive.
Disassembly and Reassembly 5-5