Removing The Cover - NEC DSX-160 Hardware Manual

Dedicated
AC Outlet
Surge
Protector

Removing the Cover

Before wall-mounting, remove the cover on the Main Equipment Cabinet.
To remove the cover:
1. Unscrew the two captive screws on the front of the cabinet cover.
2. Lift up slightly on the front of the cover — then gently slide the cover back to remove it.
DSX-80/160 Hardware Manual
Installing the Main Equipment Cabinet
Line
Blocks
Station
Blocks
To telco To earth
ground
ground
Figure 2: Installation Layout, DSX-160
Figure 3: Removing the Cover
Note: The system will respond to telco ring signal in the
range of 40-130 VAC @ 20 Hz.
Station
Blocks
DSX-80 4-Slot KSU Shown
Installation ◆ 23