Figure 2-5 Screw Positions; Figure 2-6 Sub-Cover Slide-Out; Figure 2-7 Removing The Sub-Cover - NEC SL1100 Hardware Manual

ISSUE 1.0
2. Install four screws into the wall. The screw heads must stand off from the wall about 2.5 mm
(0.098") to 3.5 mm (0.138").
Wall-Mounting Screws (M4.1x 25: 4 pcs) are attached to the KSU.

The screw diameter is 4 mm (0.158") to 4.5 mm (0.177").

3. Push the center of the Sub-Cover and slide it outward.
4. Pull out the Sub-Cover by pushing out the tabs.
Hardware Manual

Figure 2-5 Screw Positions

Figure 2-6 Sub-Cover Slide-out

Figure 2-7 Removing the Sub-Cover

SL1100
2-5