SL1100
3.
Turn the L-Bracket upside down.
Rotate the L-Bracket 180 degrees so that the upper FACE as shown in Removing the L-Bracket
is located at the bottom as shown in Securing the L-Bracket and WM Hook.
4.
Insert tabs on Battery Box into holes on L-Bracket.
Secure the L-Bracket to the Battery Box using two screws.
5.
Using two screws (M4x8), secure the WM Hook to the L-Bracket.
6.
Using two anchor bolts (locally procured), secure the WM Hook to the wall.
The WM Hook is required for securing both Floor-mount and Wall-mount cases.
2-26
Figure 2-39 Removing the L-Bracket
ISSUE 1.0
Installation