Figure 2-102 Wall-Mount Unit - 24Tixh-C; Figure 2-103 Hook-Switch Hanger - NEC SL1100 Hardware Manual

ISSUE 1.0
2. Remove the switch-hook from the unit. Turn the tab toward the top. Then slide the hook-switch
into position. Refer to Hook-Switch Hanger.
3. Install two screws into a wall. The screw heads must be remained about 3 mm (0.12").
Hardware Manual

Figure 2-102 Wall-Mount Unit - 24TIXH-C

Figure 2-103 Hook-Switch Hanger

SL1100
2-67