Installing The Dss Console; Dss Console Leg Adjustment; Figure 2-108 Low Position Setting; Figure 2-109 Cabling Of Dss - NEC SL1100 Hardware Manual

SL1100
PoE(IEEE802.3af)

PoE (Power Over Ethernet) is a LAN technology that allows standard 10Base-T/100Base-TX
data cables to pass electrical current from a power source to a requesting end device.
5.3

Installing the DSS Console

The 60D DSS-B Console can be installed on any digital extension port of 084M-B1/080E-B1 card
directly. The pair extension for the DSS Console is assigned using system programming.
5.3.1

DSS Console Leg Adjustment

The DSS Console provides the leg for angling the console to best suit each user. The leg can be set for
two different heights (Low/High).
5.3.1.1 Low Position Setting
1. Turn DSS Console over (button side down).
2. Adjust the legs to desired height.
3. Lead the Line cord through the applicable grooves.
5.3.1.2 High position setting
1. Turn DSS Console over (button side down).
2. Pull up the Leg Stoppers.
2-70

Figure 2-108 Low Position Setting

Figure 2-109 Cabling of DSS

ISSUE 1.0
Installation