Battery Bay Cover Replacement; Saving Battery Power - NEC VERSA 4000 Service Manual

2-26 Setup and Operation
5. Replace the battery bay cover as follows:
T
Align the tabs on the battery cover with the notches in the system.
T
Lower the cover onto the system.
T
Slide the cover towards the middle of the unit. Tuck the tabs on the back of
the cover under the chassis.
Tab
Figure Section 2-11 Battery Bay Cover Replacement

Saving Battery Power

The system utilizes two power conserving states: Active and Suspend mode. The system
automatically switches between these modes to conserve battery power and prolong battery
life. To save additional power, use the following guidelines:
T
put the system in Suspend mode when you need to leave the system for a short
time
T
reduce the LCD's brightness using the Fn F5 hot key to toggle the LCD backlight
between standard or full
T
turn off the system when not in use.
The system also integrates automatic power-saving features. Refer to Table Section 2-7 for
a complete description.
Notch
Notch