Software Setup; Plug And Play Software Setup; Running The Setup Utility; Removing The Nec Versa - NEC VERSA MINIDOCK 6000 Service Manual

Hide thumbs Also See for VERSA MINIDOCK 6000:

Table of Contents

2-10

Setup and Operation

To use Windows 95 software to undock the NEC Versa, locate and select

the "Eject PC" icon in the Windows 95 Start menu. When you select this

icon, a "Dock Change" window appears. The Docking Status LED blinks

green and then changes to solid amber.

Once the LED lights amber, press the Eject lever on the back of the

MiniDock and pull the NEC Versa forward to remove it.

SOFTWARE SETUP

Procedures for setting up the MiniDock software depend on whether the computer is a Plug

and Play system or a Non-Plug and Play system.

Plug and Play systems (for example the NEC Versa 6060 with Windows 95 installed) oper-

ate with a Plug and Play BIOS and require no special software installation. Simply dock the

NEC Versa, and reboot the system. The MiniDock is automatically configured for use with

the NEC Versa system.

Setting up the software to use the MiniDock is easy to do. The NEC MiniDock 6000 ships

with a CD-ROM containing an online user's guide and CardWizard

low the instructions in this section to install the online user's guide on your NEC Versa and

load the appropriate drivers.

Figure 2-12 Removing the NEC Versa

PC card drivers. Fol-

Table of Contents

Table of Contents