Docking The Nec Versa - NEC VERSA MINIDOCK 6000 Service Manual

Place your fingers in the docking grips and your thumbs on the front of
6.
the NEC Versa. Firmly push against the computer with equal pressure
against the left front and right front of the NEC Versa. Continue to press
until the connection between the computer and the MiniDock is secure.
Figure 2-8 Docking the NEC Versa
NOTE: Keep the NEC Versa straight. If the com-
puter is pushed at an angle, it does not dock prop-
erly.
If using the NEC Versa without an external monitor, open the LCD
7.
panel.
Figure 2-9 Opening the LCD Panel
Setup and Operation 2-7