Section 2
Setup and Operation
This section provides setup and operation information for the NEC Versa MiniDock 6000.
This includes cabling, power-on verification and using the NEC Versa MiniDock 6000
computer's Setup utility.
UNPACKING THE UNIT
Find an area away from devices that generate strong magnetic fields (electric motors,
transformers, etc.) Place the shipping carton on a sturdy surface and carefully unpack the
unit. The carton contents include the NEC MiniDock 6000, AC power cord, software CD-
ROM, and user documentation.
Environment
Use the NEC Versa MiniDock 6000 in a location that meets the following environmental
conditions:
T
Temperature:
T
Humidity:
Store the NEC Versa MiniDock 6000 in a location that meets the following conditions:
T
Temperature:
T
Humidity:
HARDWARE SETUP
The power cable that comes with the unit provides power to the NEC Versa MiniDock
6000 and the NEC Versa. Connect the MiniDock power cable as follows:
Connect the power cable as follows.
Position the MiniDock on a flat surface close to an AC outlet.
1.
41° to 95°F (5° to 35°C)
20% to 80% (noncondensing)
–4° to 140°F (–20° to 60°C)
5% to 95% (noncondensing)
NOTE: Make sure to plug the power cable into
the MiniDock 6000 before docking the NEC
Versa.