Section 2 Setup And Operation; Unpacking The System; Environment; Hardware Setup - NEC VERSA MEDIADOCK Service Manual

Section 2
Setup and Operation
This section provides setup and operation information for the MediaDock. This includes ca-
bling, power-on verification and using the Automatic Configuration Utility (ACU).

UNPACKING THE SYSTEM

Find an area away from devices that generate strong magnetic fields (electric motors,
transformers, etc.). Place the shipping carton on a sturdy surface and carefully unpack the
system. The carton contents include the MediaDock, AC adapter, AC power cord, software
diskettes, and user documentation.

Environment

Use the MediaDock in a location that meets the following environmental conditions:
n
Temperature:
n
Humidity:
Store the MediaDock in a location that meets the following conditions:
n
Temperature:
n
Humidity:

HARDWARE SETUP

The AC adapter and power cable that came with the unit provide power to the MediaDock
and the Versa. Connect the MediaDock AC adapter and power cable as follows:
Position the MediaDock on a flat surface.
1.
Attach one end of the AC adapter to the MediaDock power port.
2.
Connect one end of the power cable to the connector on the AC adapter.
3.
41°F to 95°F (5°C to 35°C)
20% to 80% (noncondensing)
–4°F to 122°F (–20°C to 50°C)
10% to 85% (noncondensing)
NOTE: Make sure to plug the AC adapter and
power cable into the MediaDock before docking
the Versa.