Audio Switcher Dialog Box - NEC VERSA MEDIADOCK Service Manual

2-18 Setup and Operation
4. A dialog box similar to the following appears and identifies the sound system se-
lected.
The Versa M Audio is selected.
You may select one of the bottom on
the left side to (1) Restart the Win-
dows to install the appropriate sound
driver. (2) Save the Configuration file
for the next time you start Windows.
(3) Press Cancel
to return.
Figure Section 2-12 Audio Switcher Dialog Box
5. The three buttons shown give you the following options.
n
Restart Windows — Click this button to activate the chosen audio system
immediately. The system restarts Windows and activates the sound system.
If you select Versa M audio under docked conditions, the Versa M audio
drivers load, but the sound system does not work. Once you undock the
Versa M, the sound system functions.
If you select the MediaDock sound system and are not docked, two error
messages appear. They let you know the ESS hardware is not present.
n
Save Configuration — Click this button to change the audio sound system to
be used the next time Windows restarts. This button saves the new configura-
tion but does not engage it until Windows restarts.
n
Cancel — Click this button to return to the Welcome screen without making
or saving any changes. The sound system that was active when you opened
the utility remains active.
Versa M Audio Configuration
NOTE: The new sound system selection is not
active until you restart Windows.
Restart Windows
Save Configuration
Cancel