Table of Contents
Advertisement
2-28
Setup and Operation
Emergency Eject
Use the following procedure to manually remove a disc from the CD-ROM reader if the
eject function is disabled by software or a power failure occurs.
Turn off Versa power and unplug the MediaDock.
1.
Manually open the dust door.
2.
Locate the Emergency Eject hole.
3.
Insert a steel pin (a stiff, straightened paper clip can be used) into the eject hole.
Press the pin firmly until the disc tray emerges.
Figure Section 2-20 Emergency Eject Hole Behind the Dust Door
Figure Section 2-19 Opening the Dust Door
Advertisement
Table of Contents
Troubleshooting
