Audio Cds; Adding The Cd Audio Option - NEC VERSA MEDIADOCK Service Manual

2-26 Setup and Operation
3. Press the stop/eject button again. The reader automatically pulls in the tray.
To remove a CD, simply press the stop/eject button and remove the CD when the tray
slides out. Press the stop/eject button again to close the reader door.

Audio CDs

Before playing audio CDs for the first time, add the drivers as an audio option instructed in
the next section "Adding the CD Audio Option."
Once you add the option, you need only refer to the section "Playing Audio CDs" to play
audio.

Adding the CD Audio Option

Add the "CD Audio" option to the Media Player's Device list as follows.
Press the Stop/Eject button and insert an audio CD into the tray. Press the button
1.
again so the tray retracts into the reader.
From the Program Manager, select the Main program group. Double click the
2.
Control Panel icon.
3. Double click the Drivers icon and select "Add".
4. Scroll through the list of drivers and highlight
5. If you see the prompt that the mcicda.drv is already on the system, select "New."
Click "OK" in the CD ROM drive detection window. Click on the "Close" button
6.
to close the Drivers window.
Close the Control Panel.
7.
You only need to add the CD Audio option once. After doing so, go to the next section to
play audio CDs.
[MCI] CD Audio . Click "OK."