Connecting The Versa - NEC VERSA MEDIADOCK Service Manual

2-2 Setup and Operation
4. Attach the other end to a wall outlet.
Use the procedure that follows to connect the Versa to the MediaDock.

Connecting the Versa

Attach the Versa to the MediaDock with the following steps.
Turn off Versa power.
1.
Figure Section 2-1 Connecting the AC Adapter
CAUTION: Disconnecting the plug, the AC
adapter, or the power cord while the MediaDock
and Versa are running, results in a system crash.
CAUTION: Versa power must be off when con-
necting and disconnecting it to the MediaDock.
Also, make sure all Versa port covers are se-
curely closed before connecting the computer to
the MediaDock. Open and stow the expansion
port cover as instructed in the following proce-
dure.