Bosch DB18C3100R2 Installation Manual page 51

DiBos/DiBos Micro
6
7
8
9
10
11
Bosch Sicherheitssysteme GmbH
Sensitivity
low
high
Grid - Show
Trigger delay
Set reference image
OK
Installation Guide
Change the sensitivity if the tamper detection results are not
satisfactory.
The sensitivity decreases, i.e. larger changes are needed for
tamper detection.
The sensitivity increases, i.e. smaller changes are needed for
tamper detection.
Note:
Darker areas being monitored require greater sensitivity.
A grid is shown in the image when the check box is activated.
The sizes of the drawn-in areas are oriented around the grid.
Enter the time after which an alarm is triggered. A delay of
120 to 3600 seconds can be entered.
Saves the live image displayed at this time as a reference
image. This reference image is used to compare all
subsequent live images.
Displays the reference image.
The entries are saved.
Default Configuration | en
F.01U.033.308 | V7 | 2009.09
51