Bosch DB18C3100R2 Installation Manual page 99

DiBos/DiBos Micro
7
8
9
10
NOTICE!
Multiple remote stations can be called up for one event. To do so, multiple jobs must be
created.
Bosch Sicherheitssysteme GmbH
Alarm recipient
The connection can
only be terminated by
the user of the
receiving system.
Copy settings to other
time periods...
Save
Installation Guide
The list field contains the remote stations to which an alarm
transmission is to be made.
Note:
The remote stations to be called are worked through by the
system from top to bottom. This means that the remote
station to be dialed first must be at the top of the list. The
alternative remote stations to be dialed when no connection
can be established to the first remote station are listed
underneath. The sequence is specified with the
buttons.
Activate this check box when only the user of the receiving
system is allowed to end the connection.
Otherwise, the connection will last as long as the event does.
Copies the selected job with all the settings it contains to
other time periods.
Select a job and click the button. A dialog box opens where
you can select the time periods.
The entries are saved.
Default Configuration | en
and
F.01U.033.308 | V7 | 2009.09
99