Table of Contents
Advertisement
3. Remove the front bezel by releasing the three plastic tabs on the left side and
Figure 7. Removing the front bezel
4. To reinstall the front bezel, align the three plastic tabs on the right side of the
Installing or replacing a PCI card
This section provides instructions on how to install or replace a PCI card.
Your server has two standard PCI card slots, one PCI Express x1 card slot, and one
PCI Express x16 card slot.
20
Installation and User Guide
pivoting the front bezel outward.
front bezel with the corresponding holes in the chassis, then pivot the front
bezel inward until it snaps into position on the left side.
What to do next:
v To work with another piece of hardware, go to the appropriate section.
v To complete the installation or replacement, go to "Completing the parts
replacement" on page 44.
Attention
Do not open your server or attempt any repair before reading and
understanding the "Safety" on page v and the Safety Information book. To
obtain a copy of the Safety Information book, go to:
http://www.lenovo.com/support
Advertisement
Table of Contents
