Table of Contents
Advertisement
6. Insert the two tabs 2 of the new front fan assembly into the corresponding
Figure 30. Installing the front fan assembly
7. Connect the new front fan assembly cable to the power fan connector on the
8. Reinstall the secondary hard disk drive if removed. See "Installing or replacing
42
Installation and User Guide
holes in the chassis, and press the other two tabs 1 through the holes until
the front fan assembly is secured in place.
system board. See "System-board internal connectors" on page 14.
the secondary hard disk drive" on page 28.
What to do next:
v To work with another piece of hardware, go to the appropriate section.
v To complete the replacement, go to "Completing the parts replacement" on
page 44.
Advertisement
Table of Contents
