Toshiba A20-S259 - Satellite - Pentium 4 2.66 GHz Maintenance Manual page 195

3 Tests and Diagnostics
(d) Auto Power On
Use this option to set a time and date for automatic power on and enable or disable
the ring indicator feature. Ring Indicator displays only when the computer is in
Resume mode and the Alarm Date Option displays when Alarm Time is enabled.
*
only for Modem Model
Alarm Time is set in the sequence of hours and minutes. Seconds cannot be
changed. Alarm Date Option is set in the sequence of month and day. If Alarm
Date is set to Disabled, the computer will be powered on at the same time every
day. Press
when you set the date and time.
NOTE: 1. Do not remove the AC adaptor and battery pack at the same time when you
use this feature. If you do so, data saved by the resume function will be lost.
You must also reset this option.
2. If you have set a password and the computer boots by the Auto Power On
function and Resume is on, the computer will start with the instant security
function enabled. The password = message is not displayed; however, you
must enter the password to use the computer.
(e) Panel Power On/Off
This option lets you set the Panel Power On/Off function. It is effective only in
Resume mode.
Enabled
Disabled
8. System Date/Time
Use this option to set the computer's system date/time. Press
right and press
number and press BkSp to decrease the number.
(a) System Date
Use this option to set the system date of the computer.
3-80
OPTIONS
Alarm Time
Alarm Date Option
Ring Indicator
Wake-up on LAN
**
only for LAN Model
to move the cursor to the right and
Enables the Panel Power On/Off.
Disables the Panel Power On/Off (Default)
to move the cursor to the left. Press the space bar to increase the
= 00:00:00
= Disabled
= Disabled*
= Disabled**
to move the cursor to the left
to move the cursor to the
Satellite A20 Maintenance Manual (960-444)
3.26 SETUP