4 Replacement Procedures
4.7
ODD
Removing the ODD
To remove the ODD, follow the steps below and refer to figures 4-8 and 4-9.
CAUTION: The ODD can become hot with use. Be careful when removing the module.
1. Remove the following screw securing the ODD cover.
M2.5 6
2. While sliding the latch to the back side of the computer, disconnect the ODD from PJ1820
on the system board.
4-22
FLAT HEAD screw
2
Satellite A20 Maintenance Manual (960-444)
4.7 ODD