Toshiba A20-S259 - Satellite - Pentium 4 2.66 GHz Maintenance Manual page 299

4 Replacement Procedures
3. Pass the LCD cable through the hole from the top of the display assembly toward its
bottom.
4. Close the display cover and turn the display assembly face down.
5. Place the cable earth plate first and then place the cable hold plate on the display cable and
secure them with the following screws.
NOTE: Before securing, make sure the cable hold plate is securely fit to the
guide on the chassis.
M2.5 6 TAPPING screw
6. Install the display cover to the two hinges of the display assembly and secure it with the
following screws.
M2.5 4 FLAT HEAD screw
M2.5 5 FLAT HEAD screw
7. Place the metal plate on the LCD cable and secure it with the following screw.
M2.5 4
8. Install the latch assembly on the display cover. First, install the switch (light blue) on the
front side of the computer. Then, install the inside switch (dark blue) with spring so that
three slots of the inside switch are attach to the switch.
NOTE: When installing the latch assembly, move the switch several times to
check it is working properly. Make sure the switch interlocks the inside switch.
4-82
4.29 Wireless LAN Antenna/Bluetooth Antenna/Display Cover
TAPPING screw
2
2
4
1
Satellite A20 Maintenance Manual (960-444)