4 Replacement Procedures
4. Stick the out side tape and cover shield.
1) Install the tape shield and adhesive tape to fix the top case. Be careful not to apply
excessive force to the top case.
2) Install the cover shield (C). Be careful not to apply excessive force to the control
PCB.
CAUTION: Wear anti-static gloves to prevent circuit damage caused by ESC.
3) Install the cover shield (G). Be careful not to apply excessive force to the gate TCP.
4) Stick the adhesive tape to fix the B/L wire. Be careful not to apply excessive force to
the B/L wire.
Adhesive tape
Adhesive tape
Figure 4-103 Replacing LG.Philips fluorescent lamp (SXGA+) (8)
4-144
Cover shield (C)
Tape shield
Satellite A20 Maintenance Manual (960-444)
4.30 Fluorescent Lamp
Cover shield (G)