2.
Connect the elite Panaboard to a computer using the USB cable (included).
•
elite Panaboard: Plug the B connector (smaller connector) into the elite Panaboard's USB port.
Computer: Plug the A connector (larger connector) into a USB port on the computer.
•
Do not connect the elite Panaboard via a USB hub. This could result in erroneous operation.
Notice
•
Do not connect the elite Panaboard to a computer via USB unless elite Panaboard software/book is
installed.
Only connect the USB cable after following the steps in "Installing the elite Panaboard software/
book" (page 22) to install the software.
To USB Port
3.
Connect the computer to a projector.
•
For instructions on connecting your computer and projector, refer to the respecting instruction manuals.
USB Cable
(Included)
Computer
AC
Video Cable
Usage
Projector
AC
Operating Instructions
1
19