•
When installing the elite Panaboard on the
stand, you can adjust its height to 4 different
levels.
When changing the height, remove the left
and right screws from the back of the elite
Panaboard, and securely insert them at the
desired height. Torque (greater than 1 N•m
[10 kgf•cm (9 lbf•in.)]).
elite Panaboard
Height
7
-100 mm (-3
/
in.)
8
Standard
7
+100 mm (+3
/
in.)
8
7
+200 mm (+7
/
in.)
8
5.
Confirm that the elite Panaboard can operate.
•
See "Confirming the elite Panaboard Operation"
(page 54).
6.
Turn off the power switch and unplug the
power cord from the AC outlet.
7.
Wipe the screen board surface.
•
Gently wipe the screen board surface with a soft,
moist cloth.
Notice
•
Do not use thinner, benzene, or abrasive
chemicals to clean.
(Doing so can result in discoloration.)
•
Do not wipe the screen board with a dry
cloth.
(Doing so can cause static electricity build-
up.)
Screw Position
Highest
2nd from top
2nd from bottom
Lowest
Installation Manual
Operating Instructions
53
1