Usage
Connecting External Devices
1.
Connect the external device to the elite Panaboard using a USB cable (sold separately).
•
elite Panaboard: Plug the A connector (larger connector) into the elite Panaboard's USB port.
External device: Plug the B connector (smaller connector) into a USB port on the external device.
To USB Port
About the Usage Location
•
Do not place the elite Panaboard where it is directly exposed to sunlight.
•
Do not use the elite Panaboard in a location less than 10
changes in temperature.
Note
•
The elite Panaboard may not work properly when used in one of the above locations.
•
Operating the elite Panaboard near electrical appliances may cause interference. Move away from the
electrical appliances.
20
Operating Instructions
USB Cable
(Sold Separately)
Flatbed
Scanner
MFP
°
°
C (50
F) or in a location subject to extreme
To USB Port