Lcd Menu Area - Panasonic AVHS400N - MULTI FORMAT LIVE SWITCHER Operating Instructions Manual

1. Functions in each area

1-6. LCD menu area

L LCD
The setting menus are displayed on the LCD.
When the [FUNC] button (;) is pressed and its indicator is lighted and then one of the wipe pattern selector
buttons (8) is pressed, the setting menu is displayed.
When the buttons listed below are double-clicked, the specified menu is selected. (The menu delegation
function)
The operation corresponding to the button pressed is also executed.
<List of menu delegation functions>
Crosspoint area
(AUX bus selector buttons)
Transition area
Wipe area
M Rotary encoders [F1] to [F5]
These are used to set the parameters displayed on the menus (LCD screen or external monitor). For details on
the operations, refer to the sections in "3. Basic operations".
[F1]: Rotate this rotary encoder to switch the sub menu.
[F2] to [F5]: Rotate these rotary encoders to set the parameters.
When the down arrow (↓) is shown at a menu item, its parameter is set by pressing the corresponding rotary
encoder.
When the parameter is one which is set using a numerical value, its default will be restored when the rotary
encoder is held down. (However, the network settings and date and time settings will not be returned to the
defaults.)
Sub menu
Adjust
Operate here
using [F1].
Button
KEY KEY menu/Adjust sub menu (/8)
CHR KEY menu/Auto sub menu (1/3) (with chroma key selection)
DSK DSK menu/Adjust sub menu (/5)
PinP PinP menu/Position sub menu (4/6)
BKGD TIME menu/BKGD sub menu (1/5)
KEY TIME menu/KEY sub menu (/5)
WIPE WIPE menu/Border sub menu (1/5)
WIPE #5 WIPE menu/WIPEPos sub menu (3/5) (BKGD or KEY)
SQ #5 WIPE menu/SQPos sub menu (4/5) (BKGD or KEY)
Clip
2/8 0.0
Operate here
using [F].
POWER
ALARM
F1 F2
Parameter setting area
Gain Density Invert
100.0 100.0
Operate here
using [F3].
Operate here
using [F4].
14

F3 F4 F5

Menu
Off
Operate here
using [F5].