Internal Color Signals; Setting The Color Background - Panasonic AVHS400N - MULTI FORMAT LIVE SWITCHER Operating Instructions Manual

3. Basic operations

3-7. Internal color signals

3-7-1. Setting the color background

The color background to be used by the bus can be set.
Two methods are available: under one method the Hue (hue), Sat (color saturation) and Lum (luminance) are set,
and under the other the 8 preset colors (white, yellow, cyan, green, magenta, red, blue and black) are called. The
Hue, Sat and Lum of the called colors can also be adjusted.
 Adjusting the colors
1 Press the [FUNC] button to light its indicator, and then press the [COLOR] button to display the COLOR
menu.
2 Turn [F], [F3] and [F4] to perform the color adjustments (Hue, Sat and Lum).
 Calling the preset colors
3 Turn [F5] to select the preset color using the Load item, and press the [F5] switch. The preset color is now
called, and its Hue, Sat and Lum values are displayed.
(The values which have been set will not be stored in the memory until the [F5] switch is pressed.)
<Menu display>
CBGD Hue
1/1 100.0
0~359.9 0~100.0 0~108.0
Sat Lum Load↓
100.0 100.0 White
Yellow
Green
Magenta
Black
Cyan
Red
Blue
46