4. Setting The Wipe Start Position - Panasonic AVHS400N - MULTI FORMAT LIVE SWITCHER Operating Instructions Manual

3. Basic operations

3-2-4. Setting the wipe start position

Any start position can be set for wipe pattern WIPE and SQ #5. The start position has one set of values for a
background pattern and another set for a key pattern.
1 Press the [FUNC] button to light its indicator, and press the [WIPE] button to display the WIPE menu.
2 Turn [F1] to display the WIPEPos sub menu or the SQPos sub menu.
<Menu display>
WIPEPos Select
3/5 BKGD
KEY −100.00
3 Turn [F] to select the pattern (background or key) to be set using the Select item.
4 Either operate the positioners or turn [F3] and [F4] to set the wipe start position using the X-Pos item and Y-
Pos item.
These settings can be established only when WIPE or SQ #5 has been selected as the background pattern
or key pattern.
5 Either operate the fader lever or press the [AUTO] button to check the wipe operation. (When, for instance,
–50 has been set for X-Pos and –50 for Y-Pos, the following screen (or key) appears from the bottom left and
wipe is performed while the screen (or key) moves to the screen center.)
<X-Pos, Y-Pos setting range>
6 To copy the start position settings, press [F5].
The copy destination appears under the CopyTo item. (It will not change even if [F5] is turned.)
X-Pos Y-Pos CopyTo↓
0.00 0.00
−100.00
～ ～
+100.00 +100.00
KEY
Inside screen area
Outside screen area
5