Panasonic AVHS400N - MULTI FORMAT LIVE SWITCHER Operating Instructions Manual page 67

4. Input/output signal settings
1 Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu.
2 Turn [F1] to display the Multi sub menu.
<Menu display>
Multi Split Char
6/11 10SPL-A
10SPL-B
4SPL
8SPL-A
8SPL-B
3 Turn [F] to select the display mode using the Mode item.
4 Turn [F3] to set whether to display the name of the material using the Char item.
ON: The name of the material is displayed under the sub-screen.
The "!" mark appears in front of the name of the material when no signals are input or signals with a
different format are input.
OFF: The name of the material is not displayed.
If, however, the menu and the name of the material are selected for the OSD display, the menu display takes
priority, and the name of the material is not displayed.
5 Select the position (1 to 8 in the figures) using the Pos item, and turn [F4] to set the name of the signal
using the Signal item.
Different settings are stored for 10SPL, 4SPL and 8SPL.
IN1-8 is the default setting for Pos1-8 in any of the modes.
Pos Signal
On 1 PGM
Off 1~8 IN1~8
FMEM1
FMEM2
CBGD
67