Setting The Output Signals; Types Of Output Signals; 4-4-. Assigning The Output Signals - Panasonic AVHS400N - MULTI FORMAT LIVE SWITCHER Operating Instructions Manual

4. Input/output signal settings

4-4. Setting the output signals

4-4-1. Types of output signals

There are five output signal types: PGM, PVW, AUX, MULTI and KEYOUT.
Five lines of output signals can be assigned to OUTPUT1 to 6.
PGM: This is the main-line output of the switcher; images with wipe, mix, key and other effects added to
them are output.
PVW: This is the preview output which enables the next operation to be checked in advance.
AUX: Signals selected by the AUX bus are output.
MULTI: This is the multi view display output. The multiple input signals and output signals are reduced and
output to one screen.
KEYOUT: This outputs the key signals.
Connector
PGM1, 
OUTPUT1
OUTPUT
OUTPUT3 (optional slot 1-1)
OUTPUT4 (optional slot 1-)
OUTPUT5 (optional slot -1)
OUTPUT6 (optional slot -)
4-4-2. Assigning the output signals
Assign the output signals to OUTPUT1 to 6.
1 Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu.
2 Turn [F1] to display the Output sub menu.
3 Turn [F] to select the signal name using the Signal item, and turn [F3] to set the type of output signal using
the Assign item.
<Menu display>
Output Signal
2/11 OUT1
OUT1~6
Signal type
SDI
SDI
SDI
ANALOG or DVI
ANALOG
ANALOG or DVI
ANALOG
Assign
PGM
PVW
AUX
Multi
KEYOut
Output (default)
PGM
MULTI
AUX
MULTI
AUX
MULTI
AUX
6
Assignment
Cannot be assigned.
PGM, PVW, AUX, MULTI,
KEYOut