NEC LCD8205 - MultiSync - 82" LCD Flat Panel Display Control Manual page 76

" SETXMAX " Control procedure
7.50.
7.50.1. SETXMAX Control
CMD Data1
Command Target
(0xF5) (0x88)
Command (0xF5) : Start bit
Target (0x88) : Set bit
Monitor ID (0x00) : Default value -> 0x00
CMD (0xFE) : command data
Parameter(0x3F) : ' SETXMAX ' parameter
Value: 1 ~ 3 (range)
7.50.2. Current SETXMAX state read
CMD Data1
Command Target
(0xF4) (0x89)
Command (0xF4) : Start bit
Target (0x89) : Get bit
Monitor ID (0x00) : Default value -> 0x00
CMD(0xFE) : command data
Parameter (0x3F) : 'SETXMAX ' parameter
CMD Data1
Command
Value
(0xF1)
Command (0xF1) : Start send bit
Value : Current SETXMAX getting value
1 ~ 3 (range)
Data2 Data3
Monitor ID CMD
(0x00) (0xFE)
Data2 Data3
Monitor ID CMD
(0x00) (0xFE)
Data4 Data5
Parameter
Value
(0x3F)
Data4
Parameter
(0x3F)