Assembly Guide
The details of
For DTX430K Owners
Step 7
Attaching the snare
pad
1.
Loosen the wing bolt on the joint on
the left arm, which was attached in
Step 4
.
Wing bolt
Joint
2.
Rotate the joint 90° counter-clockwise, making the joint
section horizontal.
3.
Securely tighten the wing bolt.
4.
Loosen the key bolt on the joint.
5.
Take the snare pad (i) from the package and slide it
fully into the joint.
6.
Tighten the key bolt to secure the snare pad (i) in
place.
14
DTX400K/DTX430K/DTX450K
Step 7
are different for the DTX400K, DTX430K, and DTX450K.
Left arm
90°
i
i
Owner's Manual
For DTX450K Owners
Step 7
Attaching the snare
pad
1.
Loosen the wing bolt on the joint on
the left arm, which was attached in
Step 4
.
Wing bolt
Joint
2.
Rotate the joint 90° counter-clockwise, making the joint
section horizontal.
3.
Securely tighten the wing bolt.
4.
Loosen the key bolt on the joint.
5.
Take the hexagonal rod (u) from the package and slide
it fully into the joint.
6.
Tighten the key bolt to secure the hexagonal rod (u)
in place.
7.
Take the snare pad (i) and the S wing bolt (o) from
the package and lightly tighten the S wing bolt (o).
(Five or six turns is sufficient.)
o
8.
Place the snare pad (i) on the hexagonal rod (u),
6.
which was attached in
Then tighten the S wing bolt (o) to secure the snare
pad (i) in place.
u
9.
Loosen the key bolt and adjust the angle of the snare
pad. When finished, retighten the key bolt to secure
the snare pad in place.
Left arm
90°
u
i
above, and slide it fully back.
i
o