Advanced Techniques
Setting Parameters using Menu Mode
Advanced Techniques
Menu Mode is used to set drum-module parameters and functions, which are arranged into the follow-
ing seven groups.
1-1. Pattern ............................................................ Page 41
1-2. Beats .............................................................. Page 41
1-3. Sound............................................................. Page 41
x
2-1. Pad Sound...................................................... Page 42
2-2. Pad Volume.................................................... Page 42
2-5. Reverb ........................................................... Page 43
v
5-2. Crosstalk ........................................................ Page 47
5-5. Gain ............................................................... Page 49
6-1. Timer .............................................................. Page 49
7-1. Kit Lock ........................................................... Page 53
40
DTX400K/DTX430K/DTX450K
Owner's Manual
Basic Menu Mode Procedure
The basic procedure used to activate Menu Mode and select
the parameter to be set is as follows. For details of the indi-
vidual parameters, please see the corresponding sections
below.
1.
While holding the [KIT] but-
ton, press the [SONG] button
to activate Menu Mode.
Number buttons [1] to [7]
will start to flash.
2.
Press the number button corresponding to the group
containing the parameter you wish to set. (Parameter
groups are shown in the hierarchical list on the left.)
Number
Group
button
Metronome
[1]
Settings
[2]
Kit Settings
[3]
MIDI Settings
3.
Press the number button corresponding to the parameter
you wish to set. (Parameters are shown in the hierarchi-
cal list on the left.)
4.
Enter the new setting.
You can use the number buttons to directly set parame-
ters with numerical values, such as a velocity. To enter
the value 105, for example, press the number buttons in
the order [1][10/0][5].
•
Number button [10/0] is used to enter the value zero.
You cannot use it to enter the number ten.
•
When you have entered a value, the number buttons
will flash continuously to indicate the new setting.
NOTE
You can also use the [TEMPO+] and [TEMPO-] buttons to
increase and decrease setting values. Specifically, the
[TEMPO+] button increases the current setting by one each
time it is pressed; the [TEMPO-] button decreases it by one.
Hold
Number
Group
button
[4]
Hi-hat Settings
[5]
Trigger Settings
[6]
Training Settings
[7]
Other Settings