HP D5970A - NetServer - LCII User Manual page 52

Chapter 5
9. When you have completed the PCI card installation, replace the PCI card cage
and reconnect the card cage fan to the system board:
a. Align the PCI card cage with the guides on the and left side of the chassis.
Lower the PCI card cage and plug the fan into the connector on the system
board. See Figure 5-6.
b. Press down on the top of the card cage to plug the riser card into the
motherboard.
c. Make sure that the front edge of the PCI card cage is seated on the guide
pin. See Figure 5-6.
46
Figure 5-5. Inserting a PCI Card
Installing Additional Boards