Sample Load Commands; Using Netware And The Host Adapter; Using Removable Media - HP D5970A - NetServer - LCII Installation And Configuration Manual

Sample Load Commands

Here is a simple load command with no option switches (if loaded from
drive A):
load a:\netware\adpt160m.ham
If an error message appears when attempting to load the driver, refer to
"Troubleshooting" on page 63.
Here is an example of the adpt160m.ham driver being loaded with command
line options (if loaded from drive A):
load a:\netware\adpt160m.ham verbose=y slot=2

Using NetWare and the Host Adapter

This section contains useful information on using NetWare and your host
adapter.

Using Removable Media

The adpt160m.ham driver module fully supports removable-media disk
drives, including magneto-optical drives. Removable media is treated as a
standard SCSI hard disk, with some exceptions:
• The driver only recognizes and registers media with 512 bytes/sector.
• NetWare allows you to mount/dismount the media, and to lock/unlock
the media.
NetWare's monitor.nlm program supports several removable-media options.
Follow these steps to view and configure these options:
1. Load monitor.nlm to display the various options.
2. Select Disk Information. All system disk drives appear.
3. Select the removable-media device. The following drive status items appear:
59