HP D5970A - NetServer - LCII Installation And Configuration Manual page 76

mount /dev/boot /stand
cp /stand/unix /stand/unix.orig
NOTE If you ever need to boot up from the pre-update kernel, load the
unix.orig backup kernel at the UNIX boot: prompt. To do this,
type unix.orig and press Enter.
c
This step is optional. For extra security, you may back up the mdevice file and
the sdevice.d directory To perform this backup, type the following and press
Enter:
copy -rom /etc/conf /etc/conf.bak
2
To load the driver using installpkg, follow these steps:
a
At the UNIX system prompt, type installpkg and press Enter. The screen displays
the following messages:
Confirm
Please insert the floppy disk
:
:
Strike Enter when ready
or Esc to stop.
b
Insert the Ultra3 Family Manager Set disk for SCO OpenServer and press
Enter. The screen displays the following messages:
Installation is in progress - do not remove the floppy
disk. The following packages are on this disk:
NAME DESCRIPTION
ad160 Adaptec Ultra 160 Family Driver for SCO OpenServer
5.0.x/dxx
70