Configure The Basic Settings Of The Camera [Basic]; Configure The Basic Settings [Basic] - Panasonic WV-SC384 Operating Instructions Manual

Configure the basic settings of the camera [Basic]

The basic settings such as camera title, time and date, SD memory card and the logs can be configured on the
"Basic" page.
The "Basic" page has 3 tabs; the [Basic] tab, the [SD memory card] tab and the [Log] tab.

Configure the basic settings [Basic]

Click the [Basic] tab on the "Basic" page. (☞ Pages 26 and 27: How to display/operate the setup menu)
The settings such as the camera title, time and date, etc. can be configured on this page.
[Camera title]
Enter the title of the camera. Click the [Set] button after
entering the title of the camera. The entered title will be
displayed in the "Camera title" field.
Available number of characters: 0 - 20 characters
Unavailable characters: "&
Default: Varies as follows depending on the model in
use.
WV-SC384
WV-SC385
WV-SW395
[Date/time]
Enter the current time and date. When "12h" is selected
for "Time display format", "AM" or "PM" can be
selected.
Available range: 01/01/2010 00:00:00 - 31/12/2035
23:59:59
Important:
• Depending on the conditions such as the ambient
temperature and operating period, the configured
time & date may not be accurate.
• Use an NTP server when the more accurate time &
date setting is required for the system operation.
(☞ Page 92)
[Time display format]
Select the time display format from "24h", "12h" and
"Off". Enter the current hour reflecting this setting when
entering the current time and date for "Date/time". To
hide time and date, select "Off".
Default: 24h
[Date/time display format]
Select a date/time display format. When "2010/04/01
13:10:00" is set for "Date/time" after selecting "24h" for
"Date/time display format", time & date will be respec-
tively displayed as follows.
DD/MM/YYYY: 01/04/2010 13:10:00
MM/DD/YYYY: 04/01/2010 13:10:00
DD/Mmm/YYYY: 01/Apr/2010 13:10:00
YYYY/MM/DD: 2010/04/01 13:10:00
Mmm/DD/YYYY: Apr/01/2010 13:10:00
Default: DD/MM/YYYY (PAL model)
Mmm/DD/YYYY (NTSC model)
[Summer time (daylight saving)]
Select "In", "Out" or "Auto" to determine whether or not
to apply daylight saving time. Configure this setting if
the summer time (daylight saving time) is applied in the
location where the camera is in use.
In: Applies summer time. An asterisk (*) will be dis-
played on the left side of the displayed time and
date.
Out: Does not apply summer time.
Auto: Applies summer time in accordance with the set-
tings for "Start time & date" and "End time & date"
(month, week, day of the week, time).
Default: Out
[NTP/Time zone]
When "NTP" is clicked, the [NTP] tab of the "Server"
page will be displayed. (☞ Page 92)
30 30