Configure The Settings Relating To The Preset Positions ("Preset Position" Setup Menu) - Panasonic WV-SC384 Operating Instructions Manual

Network camera
Hide thumbs Also See for WV-SC384:
Table of Contents

Advertisement

Important:
• When "16:9" is selected for the aspect ratio of
JPEG/H.264, the image will be displayed clipped from
the image of "4:3".Therefore even when "16:9" is set,
the brightness of the masked area will affect the image.
It is recommended that the aspect ratio should be once
set to "4:3" before masking.
Note:
• When the [Reset] button is clicked, masking for all the masked areas will be canceled.
Configure the settings relating to the preset positions ("Preset position"
setup menu)
Click the [Setup>>] button of "Preset position" on the [Image/Position] tab of the "Image/Audio" page (☞ page 58).
It is possible to register, edit and delete the preset positions on this page.
When the focus, brightness, zoom factor are adjusted, the adjustment will be applied immediately to the currently
displayed image on the [Image/Position] tab.
SW395
SC385
67
Image in the aspect ratio of "4:3"
SC384
Areas where the image is
not displayed when "16:9"
is selected for the aspect
ratio
Image in the aspect ratio of
"16:9" (Being cut out from
the aspect ratio of 4:3)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wv-sw395Wv-sc385Wv-sw395eWv-sc385eWv-sc384e

Table of Contents