HP D6030A - NetServer - E50 Installation Manual page 40

A Customizing the HP NetServer AutoPilot Server Software
/t Changes the ASR hardware restart time. This is the time after which
the system will be automatically restarted if the ASR hardware timer is
not reset by the service program. This value is preset to 600 seconds
(10 minutes). In other words, if the service program is not able to
execute for 10 minutes (indicating a hung system), the system will be
automatically restarted by the ASR hardware.
You may reconfigure the restart time in the range 300 seconds (5
minutes) to 1800 seconds (30 minutes) by running ASRUSER /t. The
change will remain in effect even after restarting your system.
/p Changes the ASR service program polling period. This is the time
interval at which the ASR service program resets the ASR hardware
timer. It must be less than the automatic hardware reset time. This
value is pre-configured to be 300 seconds (5 minutes). In other words,
the service program will reset the hardware timer every 5 minutes. To
change this time, run ASRUSER /p. The value you choose must be
less than the value entered for the Automatic Hardware Restart time.
/o Gets the current ASR timeout and polling period
/v Gets the version number
/c Prints ASR counter statistics, for installation testing and verification
28