Memory Configuration - HP LC2000r - NetServer - 128 MB RAM Handbook

Switch/
Jumper
S8C1
CMOS Clear: Setting this switch to ON clears CMOS and set the real-
time clock (RTC) to the manufacturing defaults.
Password Clear: Setting this switch to ON clears the password when
the system reboots. Set to OFF to re-enter the password.
Flash Enable: Setting this switch to ON lets the user update the
contents of flash memory (BIOS) with the HPUpdate Utility.

Memory Configuration

Each ECC memory board has 12 SIMM sockets supporting 2 MB-32 MB, 70 ns or faster approved, fast-page
parity SIMMs. You can install any size SIMM in any bank; however, all four SIMMs within a bank must be the
same size.
Bank 3
Bank 2
Bank 1
When installing additional memory, note the following:
The following HP SIMMs are supported:
Type
4 MB SIMM (70 ns)
8 MB SIMM (70 ns)
16 MB SIMM (70 ns)
32 MB SIMM (70 ns)
SIMMs must be installed in sets of four.
SIMMs must be installed in sequential order starting with Bank 1.
154
Description
Configuration Switches - Switch S8C1
CMOS CLEAR
PWD CLR
Flash Enable
1 2 3
O
N
Product Number
D2974A
D3577A
D2297A
D3578A
Default
ON
OFF -
default
ON
OFF -
Default
ON -
Default
OFF
Bank 3
Bank 2
Bank 1