Preparing The Sliding Rails - HP 245161-B22 - 10642 42U Rack Shock Pallet Reference Manual

Preparing the Sliding Rails

Components mounted with this type of rail are designed for frequent accessibility,
maintenance, or both.
1. Extend the component rail until the component rail release latch clicks (1).
2. Hold down the component rail release latch (2) and completely remove the
component rail from the sliding rail assembly.
NOTE: You will attach the component rails to the component before you insert the unit
into the rack.
Figure 4-6: Removing the component rails from the
sliding rail assembly
HP 10842 Rack Reference Guide
2
Installing Components in the Rack
1
4-9