Preparing The Component; Adjustable Fixed Rails - HP 245161-B22 - 10642 42U Rack Shock Pallet Reference Manual

Installing Components in the Rack
2. Align the rear of each sliding rail with the cage nuts on the rear of the rack and
secure them with two M6 x 16 screws.
Figure 4-11: Securing the rear of the sliding rails

Preparing the Component

This section contains general instructions for preparing a typical rack-mountable
component for installation. Refer to the documentation that ships with each
component for complete installation instructions.

Adjustable Fixed Rails

If the component mounts with adjustable fixed rails, typically there is nothing
additional to install on the component before inserting it into the rack.
4-14 HP 10842 Rack Reference Guide