Preparing The Water Valve Tubing; (For Bottom Freezers Only) - Whirlpool ECKMF94 - Automatic Ice Maker Installation Manual

Preparing the water valve tubing
(for bottom freezers only)
Refer to the side diagram for the following
steps.
CUT TUBING
HERE
1. Untape the coiled flexible tubing coming
from the water valve and straighten it.
2. Starting at the top of the compression nut
on the water valve, measure the tubing for
30: and mark the location on the tubing
with a pen.
3. Use a pair of scissors or a hobby knife, and
make an even cut across the water valve
tubing at the 30'mark you made in the
previous step. Discard the excess tubing.
I II
MAKE AN
EVEN CUT
ACROSS
w
Compression nut
Water valve
/
Preparing the water valve tubing
(for bottom freezers only)
11