Understanding The Error Messages - Brother 9840CDW - Color Laser - All-in-One User Manual

e
Press Black Start or Color Start if you
have finished.
f
Press the dial pad key to enter the
number of copies you want.
Press OK.
Direct Print
FILE0_1.PDF
No. of Copies:
Press Start
g
Press Black Start or Color Start to
print the data.
CAUTION
To prevent damage to your machine, DO
NOT connect any device other than a digital
camera or USB flash memory drive to the
USB direct interface.
DO NOT remove the USB flash memory
drive from the USB direct interface until the
machine has finished printing.
Note
• If you want to change the default setting
for the paper tray to feed paper from,
press Menu, 1, 7, 3 to change the paper
tray setting.
• You can change the default settings for
direct print by using the control panel
when the machine is not in the direct print
mode. Press Menu, 5 to enter the
USB Direct I/F menu. (See Menu
table on page 204.)
Understanding the
error messages
Once you are familiar with the types of errors
that can occur while you print data from the
USB flash memory drive with direct print, you
can easily identify and troubleshoot any
problems.
1
(See Error and maintenance
messages on page 133 for the detailed
solution.)
Printing data from a USB flash memory drive
Out of Memory
This message will appear if you are
working with images that are too large for
the machine's memory.
Unusable Device
This message will appear if you connect
an incompatible or broken device to the
USB direct interface. To clear the error,
unplug the device from the USB direct
interface.
14
14
93