Panasonic AG-HMC80PJ Operating Instructions Manual page 104

Setup menu list (continued)
RECORD SETUP screen (continued)
Display
Item
TCG CAMERA
DV IN
TC PRESET CAMERA
DV IN
1394 UB DV IN
REGEN
UB MODE CAMERA
DV IN
(DV mode
only)
UB PRESET CAMERA
DV IN
DV IN PRESET DV IN
MIC GAIN1 CAMERA
MIC GAIN2 CAMERA
META CARD CAMERA
READ
(AVCHD mode
only)
META DATA CAMERA
REC
(AVCHD mode
only)
USER CLIP CAMERA
NAME
(AVCHD mode
only)
104
mode
Sets the mode in which you advance the internal time code generator.
FREE RUN: The time code is advanced regardless of the operation mode.
A slight time error may occur when switching to PB mode if the frame rate is set
to 4P.
REC RUN: The time code is advanced only when recording.
Sets the initial time code.
YES NO
• Set the frame value to 0 or a multiple of 4 when you set recording frame rate
of recording format to 4P. If any other value is set, the recorded time code will
mis-match.
Sets user information for recording.
ON: Records user information of the device connected to the DV terminal.
OFF: Records user information set with this camera.
• When set to ON, UB MODE cannot be changed.
Sets recording details as user information.
USER: Records user information.
TIME: Records the time.
DATE: Records the date.
TCG: Records the value of the time code generator.
FRM.RATE: Records frame-conversion frame rate information.
Sets the user information.
YES NO
Set to ON to synchronize initial TC values when shooting with multiple cameras.
ON OFF
• Does not work when 1394 TC REGEN is set to ON.
Sets the input level for external microphones in AUDIO IN CH1.
-50dB
-60dB
Sets the input level for external microphones in AUDIO IN CH.
-50dB
-60dB
Loads the metadata recorded on the SD Memory Card into the unit.
Up to 8 metadata files stored on the SD Memory Card (MTDT00 to MTDT07) are
displayed in a list. Files with no corresponding data are displayed in gray.
• Displayed in gray when metadata is not stored on the SD Memory Card.
Sets whether to record the metadata to be loaded into the unit simultaneously on
a SD Memory Card.
ON: Records simultaneously.
OFF: Does not record simultaneously.
Selects the method of CLIP NAME recording.
TYPE1: User clip name is the same as the CLIP NAME if there is no uploaded
metadata or data.
TYPE2: User clip name is the same as the CLIP NAME if no combination of data
and COUNT value is uploaded, or if there is no uploaded data.
Description of settings
indicates the factory setting.