Printing photos on a printer (PictBridge) (continued)
13
Select [Printer], and press the ENTER
button.
Printer
•
Select YES when the confirmation message
appears, and then press the ENTER button.
•
To cancel printing, select CANCEL and press
the ENTER button. A confirmation message
appears.
YES:
Clear print settings, and return to step 4.
NO:
Keep print settings, and return to step 4.
•
PictBridge will close when you disconnect
the USB connection cable (optional) after
printing finishes.
•
To prevent printing errors, do not do the
following while printing is in progress.
�
Disconnect the USB connection cable
�
Open the card cover and remove the SD
Memory Card
�
Change modes
�
Turn the power off
•
When you print photos recorded with this
camera in 16:9 aspect ratio, the edges may
be cut off.
If the printer supports functions such as
trimming and printing without frames, try
clearing these settings before printing. (Refer
to the operating instructions for the printer.)
•
When the camera is connected to a printer,
DPOF printing is disabled.
48