Printing Photos On A Printer (Pictbridge) - Panasonic AG-HMC80PJ Operating Instructions Manual

Printing photos on a printer (PictBridge)

• A PictBridge-compatible printer is necessary.
(Refer to the operating instructions for the
printer.)
USB connection cable (optional)
1
Set the POWER switch to ON.
(Page 30 of Vol.1)
2
Connect the camera to the printer.
The USB function select screen appears.
• Connect the camera to the printer directly,
and do not use a USB hub.
• Use the AC adaptor to eliminate battery
concerns.
3
Select [PRINTER] and press the ENTER
button.
4
Select the photo to print, and press the
ENTER button.
5
Use the up or down button of the cursor
button to set the number of copies to print.
• You can set up to 9 copies to print.
• To cancel the setting, set the number to 0.
• You can set up to 999 different photos to
print.
6
Select ENTER and press the ENTER button.
7
Press the FUNC/EXEC button.
The cursor moves to the operating menu.
8
Select [Tool] and press the ENTER button.
Tool
9
Select whether to print the date.
• This is only available for printers that support
date printing.
10
Select the print size.
STANDARD : Standard size set for the printer
4X5 INCH : 10X17 mm (4X5 inch) size
5X7 INCH : 17X178 mm (5X7 inch) size
4X6 INCH : 10X15 mm (4X6 inch) size
(postcard)
A4 : A4 size
• You cannot select print sizes that are not
supported by the printer.
11
Select the layout.
STANDARD : Standard layout set for the printer
: Prints without frames
: Prints with frames
• You cannot select layouts that are not
supported by the printer.
12
Select ENTER and press the ENTER
button.
(Continued on the next page)
47