Tv/Monitor - Panasonic AG-HMC80PJ Operating Instructions Manual

Connecting external units (continued)

TV/Monitor

Only the output signals from the camera are shown.
HDMI cable (optional)
■
When outputting video and audio signals from the camera to an external device, connect to the
input terminals of the external device.
• It is recommended that you use Panasonic's HDMI cable.
• HDMI output will take priority if both HDMI cable and VIDEO OUT cable are connected at the same time.
Simultaneous output is not possible.
• This product is not compatible with VIERA Link.
• Since the component terminal only outputs pictures, an audio cable must be connected at the same time.
(Connect the cable to the audio input terminal of the component terminal input. For details, refer to the
operation manual for the TV.)
• The component terminal of the unit is the BNC type. To connect a pin-type cable, use a pin-BNC
converter plug (optional).
■
Output by HDMI output, COMPONENT OUT, and VIDEO OUT
• When an HDMI cable is connected simultaneously with a COMPONENT cable or a VIDEO cable, HDMI
output is prioritized.
• Simultaneous output from COMPONENT OUT and VIDEO OUT is not possible. Output is determined by
the terminal selected by the OUTPUT switch.
5
VIDEO
OUTPUT
LINE MIC LINE MIC
AUDIO
COMPONENT
OUT
CH 1
AUDIO
ON ON
IN
Y/
VIDEO
OFF OFF
MIC+48V MIC+48V
CH 1 CH 2 CH 2
P
B
P
R
CAMREMOTE
ZOOM
S/S
FOCUS
IRIS
Connect
these
cables
to the
terminals
on the
television.
Video cable
(optional)
Audio cable (optional)
TV/Monitor